How To Install Bertha Hurricane Panels

Click Here to Download the DIY Hurricane Installation Manual

Your home'south windows are probably unlike from that of your neighbors. Then, why would you want the same Hurricane panels that they accept? At DIYHurricaneSupply.com nosotros customize the panels and tracks to fit your home'southward needs. This customization doesn't brand the cost shoot up because we receive the best manufacturing plant direct pricing and pass the savings along to you. Plus since you'll exercise a DIY installation, there are no contactor costs to factor in.

DIYHurricaneSupply is one of a kind in that it provides a custom product at a low price and it's all packaged together in a kit that fits your home's needs. The simple to use components: tracks, headers and slide-in-panels are easy to install. Your DIY Hurricane supply kit fifty-fifty comes with the hardware! Plus, we're hither to help through the installation process first to finish with how-to videos, tutorials and live Complimentary tech support.

Installation Videos

Check the packing slip against the product you have received. If there are any concerns,
delight contact u.s.a.; do not return whatsoever product before contacting us.

Materials:

Afterwards identifying all the correct parts, please collect the following:
• Writing utensil (pen or pencil)
• Level
• Wrench or socket wrench
• Drill and appropriate drill bit:
• iii/sixteen" cement drill bit (for cement or brick structures)
• three/16" metal drill bit (for structures with siding or wood structures)
• i/4" metal drill bit (in improver to one of the to a higher place drill bits) for
vertical mounting method

Procedure
Horizontal Installation

1. Locate whatever obstructions (such as overhangs or protruding windowsills) that may interfere with the installation of the shutters; the paneling will end at the obstruction.
two. Determine where to locate the lesser console; information technology should overlap the lesser of the windowsill or doorframe by 2", if in that location is no obstruction. Mark location of holes to be drilled on side of edifice.
3. Drill a hole in ONE side simply. Secure with a spiral (a socket wrench may be necessary).
4. Before drilling any other holes, ensure the panel is level. One time this is complete, drill other holes (two on each side for not-BOCA hardware or 4 for BOCA hardware) and secure with screws.
5. Repeat steps 3 and 4; information technology is non necessary to use the level. Ensure that each panel overlaps the previous panel at least one rising.
6. Once the opening is covered by paneling, attach wing-basics to secure the panels tightly.

Removal: Remove fly-nuts and panels. Store together for easy reinstallation. Leave screws in place for reinstallation.
Reinstallation: Identify panels on screws and secure to the wall with wing-basics

Hurricane Shutter Termonolgy

Vertical Installation

1. Locate any obstructions (such as overhangs or protruding windowsills) that may interfere with the installation of the shutters. You may demand to locate the H Aqueduct or F Rail on the obstacle.
2. Drill holes (if they are not already pre-drilled) into H Channel (top) for securing it to the building.
iii. Measure the height of panels and determine the distance needed between the H Channel (pinnacle) and F Rails (bottom).
4. Make up one's mind the location of the F Rails beneath the window or door. (It may need to be secured to an obstruction. If the obstacle protrudes i" or more, it may be necessary to secure a piece of wood below the obstruction to adhere the F Runway.) Adhere F Rails to the building with ONE screw equally close to the middle of the F Rails as possible.
v. Ensure F Track is level, then attach additional screws, starting at the center and moving outward; secure with wing-nuts. Friction match up panels with rail and slide F Track bolts into the track at each of the pre-drilled holes in each panel; overlap panels past at to the lowest degree one rise. Secure with fly-basics.
6. Determine the location of the H Channel above the window or door. (It may demand to be secured to an obstacle.) Attach H Channel to the edifice with ONE screw as close to the middle of the H Channel as possible.
7. Ensure the H Channel is level and stop inserting screws. Secure with wing-basics.
8. Insert top of panels into the H Channel.

Removal: Remove wing-nuts and panels and slide bolts out of F-rails. Store together for like shooting fish in a barrel reinstallation.
Reinstallation: Match up panels with rails and slide F Track bolts into the track. Overlap panels past at least one rise and secure with fly-nuts. Insert acme of panels into the H Channel.

Note: For either installation method, panels can be overlapped by more than i rise, merely should always be overlapped at least 1 ascent for the most effective installation.
Annotation: Special situations (such as protruding windowsills, overhangs, etc.) may require minor adjustments to the to a higher place instructions.

Source: https://www.diyhurricanesupply.com/install.aspx

Posted by: loweinquen.blogspot.com

Share this post